The 1998 - 2007 Toyota Land Cruiser 100 Series has a compact torsion bar IFS front suspension, and requires a lot of work to be done in a small space. When lift is added via torsion bar adjustment there is even more spring energy that must be absorbed to adequately control the vehicle. Understanding this, ICON engineers have developed a unique 2.5 Aluminum Series front shock that can handle these demands. With a lower spherical rod end bearing and heavy-duty upper stem bushings, deflection is kept to a minimum for precise control of the suspension even under high loads. 2.0 Aluminum Series rear shocks are included in this stage to offer balanced damping front to rear.
ICON 2.5” suspension systems lift your Toyota LC100 while improving ride quality and performance. With endless hours spent testing and tuning our suspension components and shocks, you’ll have the best suspension solution on the market.
APPLICATION NOTE #72: If alignment cams are adjusted to max inward setting (Negative Camber), arm will contact 2.5 shock at full droop. Aftermarket arm required.
2.5 Aluminum Series front shocks feature one-piece impact extruded aluminum cylinders for excellent corrosion resistance and consistent finish
APPLICATION NOTE #58: Kits consist of shocks only. Additional components required to achieve desired lift height over stock.
Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.)
APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE
1998-2007 TOYOTA LAND CRUISER 100 SERIES/LEXUS LX470 0-2" LIFT STAGE 1 SUSPENSION SYSTEM
ICON 98-07 Toyota Land Cruiser 100/Lexus LX470 Series 0-2in Stage 1 Suspension System
Vehicle specific tuned front and rear shocks for superior shock damping and control
Recommended Aftermarket Wheels: 17x8.5 with 4.75” Backspace / 0mm Offset
98-07 LAND CRUISER 100 / LEXUS LX470 SERIES 0-2" STAGE 1 SUSPENSION SYSTEM
100% Bolt-on - no drilling, cutting or welding necessary for install
FK rod end bearings for extended longevity and minimal deflection
APPLICATION NOTE #97: NOT COMPATIBLE WITH AHC EQUIPPED MODELS
6061 Aircraft grade aluminum CNC machined components
2.0 aluminum body rear IFP shock with 5/8" shaft
98-07 LC100/LEXUS LX470 STAGE 1 SUSP SYS
OEM Wheels & Tires Fitment: Yes
Suspension Shock Absorber Kit
Ships in multiple boxes
SHOCK ABSORBER KIT
K53081
