ICON’s 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Featuring one-piece impact extruded aluminum cylinders, these 2.5 Aluminum Series shocks offer lighter weight, improved corrosion resistance, and a more uniform finish than traditional plated steel cylinders. Like all ICON'S Shock Absorbers, 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below thetop cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.
ICON Vehicle Specific 2.5 Aluminum Series shocks are designed to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in length and damping tune.
One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
Piggyback reservoir design improves heat dissipation to reduce shock fade during prolonged use
Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
APPLICATION NOTE #657: Compatible with 0-2.5" of rear lift on 2019-2026 Ram 1500 Rebel
APPLICATION NOTE #656: Compatible with 0-3" of rear lift on most Ram 1500 submodels
PTFE lined spherical bearings and application specific mounting hardware
APPLICATION NOTE #131: Will not fit 2019-2024 Ram 1500 Classic models
ICON 2019+ Ram 1500 0-3in Rear 2.5 Series Shocks VS PB CDCV - Pair
APPLICATION NOTE #105: Not for vehicles with rear factory air ride
APPLICATION NOTE #184: Will not fit Ram 1500 TRX or Ram 1500 RHO
2019-UP RAM 1500 0-3" LIFT REAR 2.5 VS PIGGYBACK CDCV SHOCK PAIR
7/8” diameter induction hardened, chrome plated shock shaft
TECH NOTE: Not compatible with 2021-Up Ram 1500 TRX trims.
Nitrogen charged monotube design with piggyback reservoir
6061 aircraft grade aluminum CNC machined components
APPLICATION NOTE #150: Shocks are fully serviceable
Double-sealed Schrader caps reduce risk of damage
19-UP RAM 1500 0-3" REAR 2.5 VS PB CDCV PAIR
19-26 RAM 1500 0-3" REAR 2.5 VS PB CDCV PAIR
19-UP RAM 1500 0-3 REAR 2.5 PB CDC PAIR
Suspension Shock Absorber Set
REAR SHOCK ABSORBERS
SHOCK ABSORBER PAIR
100% Rebuildable
100% Revalveable
217716CP
