radius to provide additional clearance to the Rocker arm adjuster at peak lift. The thicker .165"wall is stiffer and stronger than previous .125" wall offerings, thereby providing more accurate valve motion and durability. The pushrods are made in the U.S.A. from one-piece, heat-treated 4130 chromemoly Steel tubing, which makes them stronger than most pushrods on the market today.Single (1) 8.900" PushrodMiddle of Pushrod is larger in diameter than both ends Offers the benefits of a large, 7/16" Pushrod combined with the clearance of a 3/8"Both 5/16" ball ends have a 210˚
Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends. The extra clearance at the top and the bottom offers the benefits of a large, 7/16" Pushrod combined with clearance of a 3/8" option for a higher-flowing intake port. The pushrods are also tapered to clear the top of most offset Roller lifters. Both 5/16" ball ends have a 210˚
For applications that need more clearance this .165" wall thickness, dual taper 7/16" diameter 8.900" long pushrod offers the clearance of a 3/8" yet with the rigidity of a 7/16" pushrod.
More accurate valve motion and durabilityMade in the USA from one-piece, heat-treated 4130 chromemoly Steel tubing, making them stronger than most pushrods on the market today
Chromemoly Pushrod; Pushrod Set; Wall Thickness; 1 Piece Pushrod; Ball Pushrod; 5/16" Pushrod; .080" Wall Pushrod; Pushrods; OHV Pushrods; Replacement Pushrods
radius to provide additional Rocker clearance at peak lift.165" wall is stiffer and stronger than previous .125" offerings
Dual Taper 8.900" Long, .165" Wall, 7/16" Diameter Pushrod
PUSHROD,8.900" DUAL TAPER 3/8- 7/16 .165U
COMP Cams Pushrod8.900in Dual Taper 3/8
Available in a set of 16 under 8675-16
Dual Taper 8.900".165" 7/16" Pushrod
Engine Push Rod
None
