The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run. Today's all-out race engines demand the highest quality components at every step, and COMP Cams Hi-Tech pushrods fill that requirement. Hi-Techâ„¢ pushrods feature a one-piece design from .080" wall, seamless chromemoly tubing that ensures the ultimate in strength and durability. Ends are precision formed, yielding added thickness and strength in the critical tip area, while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated for maximum strength to ensure compatibility with guide plates. They are OD ground for consistency and black-oxide finished with length and part number laser etched on the OD for ease of identification.
Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 7.550" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.
Chromemoly Pushrod; Pushrod Set; Wall Thickness; 1 Piece Pushrod; Ball Pushrod; 5/16" Pushrod; .080" Wall Pushrod; Pushrods; OHV Pushrods; Replacement Pushrods
Hi-Tech 7.550" Long, .080" Wall, 5/16" Diameter Pushrod Set
Hi-Tech 7.550".080" Wall 5/16" Pushrods
COMP Cams Pushrods Hi-Tech 5/16 7.550
Available individually under 7958-1
PUSHRODS, HI-TECH 5/16 7.550
Engine Push Rod Set
Engine Push Rod
None
