Like any application that makes its way into ICON’s research and development department, the Ford Expedition was examined thoroughly in stock form in an attempt to find where the OE components were limiting performance or could be improved upon. After hours of in-house R&D and thousands of miles of real-world testing a collection of ICON components including front and rear coilovers and upper control arms were organized into two staged suspension systems that each delivers a unique level of performance to the Expedition. A remarkable level of performance is established with the 2.5 Series remote reservoir CDC Valve shocks included in ICON’s Stage 1 system, and only improves with the addition of upper control arms (tubular steel or billet aluminum) in the Stage 2 systems. These systems drastically increase the vehicle’s ride quality, reduce body roll, maximize wheel travel, and provide a lift height range of .75-2.25” to allow for the fitment of larger, more aggressive wheel and tire combinations. A bolt-on design also makes for an easy install with the ability for the vehicle to be returned to stock if needed.
Recommended Aftermarket Tires: 33" x 11.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required)
APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.00” Backspace / 6mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.625" Backspace / 16mm Offset
Vehicle specific tuned front and rear shocks for superior damping and vehicle control
Increased wheel travel and ride quality over stock with no change in towing capacity
Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25" Backspace / 6mm Offset
APPLICATION NOTE #124: REAR LIFT HEIGHTS OVER 1" INCREASE ADVANCETRAC SENSITIVITY
ICON 2014+ Ford ExpeditioICON 4WD .75-2.25in Stage 1 Suspension System
2014-2020 FORD EXPEDITION 4WD .75-2.25" LIFT STAGE 1 SUSPENSION SYSTEM
2014-UP FORD EXPEDITION 4WD .75-2.25" LIFT STAGE 1 SUSPENSION SYSTEM
Corrosion resistant CAD plated coilover shock body with 7/8" shaft
Unique valving developed specifically for the 2014-2020 Expedition
100% Bolt-on system - no cutting, or welding necessary for install
2014-2020 FORD EXPEDITION 4WD .75-2.25" STAGE 1 SUSPENSION SYSTEM
FK rod end bearings for extended longevity and minimal deflection
2014-UP FORD EXPEDITION 4WD .75-2.25" STAGE 1 SUSPENSION SYSTEM
6061 Aircraft grade aluminum CNC machined components
Adjustable coilovers from .75-2.25" of lift height
High strength alloy CNC machined lower bar pin
2014-UP EXPEDITION 4WD STAGE 1 SUSP SYS
14-20 EXPEDITION 4WD STAGE 1 SUSP SYS
Factory Wheels & Tires Fitment: Yes
Ships in multiple boxes
Suspension Lift Kit
SUSPENSION SYSTEM
